Chinese Staircase Gimp: A Step-by-Step Guide to Crafting a Colorful Lanyard Bracelet

Hi, I’m Colleen from The Lanyard Ladies and now I’m going to show you how to make a Chinese staircase bracelet. I’m using five strings. The more strings you use, the thicker the bracelet will be when it’s finished. So I have five strings about 20 inches long. I’m going to put a knot at the top and I’m going to take my strings and I’m going to put them onto my cardboard. Put a slit at the top and a slit at the bottom. And we’ll tape the knot in the back so it doesn’t slide out as we’re making our bracelet. And we attach it to the clipboard.

Now we’re going to take four of the five strings and tuck them in the slit at the bottom of the board. And this is the bracelet that uses the backward knot which is the letter D. And we’re also going to change our colors as we go along. So we’re starting with the pink and we’re making the D. You take the end of the string you’re making the D with on the center strings into the loop of the pink D and you pull it up. And you continue to do this. We’re making pink Ds to that first line and then we’re going to change the color. It’s important as you pull up each knot that you pull it nice and tight next to the previous knot that you just made. You don’t want to see any of these center strings underneath the pink as you make your knots. Okay, so we’re just about to that first line. And now we’ll show you how to change the color. You’re going to take the strings out of the slit at the bottom. You select which color you want to do next. We’ll take the purple. And you put all the other strings back in including the pink that you just worked with. And now you start making the Ds with the new color. And you just continue doing this, now with my purple Ds, until we get to the next line.

Okay. So you’ll do this with each of the different colors until the bracelet is long enough to fit your wrist. Here’s a sample right here on my wrist of what the Chinese staircase bracelet looks like. Have them make these fun Chinese Ladder Friendship Bracelet. Hi Everyone! Friendship bracelets provide endless hours of fun especially during the summer. As a Mom. Plus, did I mention… these are really easy too? I like for the strings to be on the longer side. You want to have your bracelet on the thicker side. Choose one strand of floss and make a loop laying it across (from left to right) the other pieces of floss as seen above. Pull the string through the loop or the number four that you created like the photo above. Keep repeating this process with the same color. The floss or string will start wrapping itself all the way around the more you do this. To change a color, just pick up the next color you’d like and create your loop. Just look at how bright and colorful these are. The color combinations are endless. You’re kids will love these Chinese Ladder Friendship Bracelet. Melanie Artz is a Mom, an artist, an Art Educator and a lover of all things creative. She has been sharing her passion for art and the creative process with her students for the past 17 years. When not teaching, she continues to share her love for creating at Artzy Creations. I remember making these when I was a kid! Want to see more summertime fun ideas? Want to make a gift for your friends? Give them a Chinese Staircase friendship bracelet and tell them you made it yourself! The fact that you put time and effort into making them a personalized gift will make it all the more special.

  1. Cut 3 different colored strings about 32 inches (81 cm) long and tie them in a knot about 2 inches (5 cm) from the ends. Hold 1 string in your left hand and the other 2 in your right. Keep making loops until you want to switch the color, then take the next string and follow the same process. 32 inches should be plenty of string for the average bracelet. If the bracelet is for you or someone you are with, wrap the string around their wrist or ankle.
  2. Lay each string out, one right next to the other in the order you wish them to appear in your design. Take the string you would like to use first in your left hand. Hold both of the other strings in your right hand, putting a little tension on the tape to keep these two strings straight. Pull the thread through the loop. Take the tail, or end, of the '4' by putting your hand in the wide space of the '4' and pull the tail. As you tie the knot, pull the two strings in one hand vertically (downward), or parallel to your table. Pull the tail of the string with which you pulled through the loop gently upward toward the top of the bracelet where it is taped to the table.
  3. Finish off this color. Continue repeating this overhand loop until you have enough length of this color on your bracelet. Repeat this process with the next color you would like to see in your bracelet.
  4. Tie a knot to secure the end. Remove the tape and take the top end of the bracelet in one hand and the bottom in the other. If the bracelet is for you, have someone help you tie it directly on your wrist for you. Leave it loose enough that you can get it off without untying it, but not so loose it falls off.
  5. You can braid the remaining portion of the string on both ends beyond the knot. If you can, tie more string onto the bottom of the strand that is too short. If you can't find the exact color, you could use a similar color. This could also be a cool experiment. Try adding more strings to your next bracelet! Double up the strings, or use more than 3 for a more colorful design.

Sometimes you may get messy or bad knots in the string. When this happens, don't tug on the string. That will make the knot worse. If you're working on a desk or hard surface, try putting the string in a loop and hanging it on a safety pin or paper clip before taping it. Once you get the hang of the weaving pattern, try adding more strings to your next bracelet!

Variations: different colors, lengths, and tools

Finish off a variety of projects by adjusting the number of strings. The more colors and strings you use, the thicker and more colorful the final piece will be. A five-string setup yields a noticeably thicker bracelet than a three-string version. You can also create a key chain version by adapting the same technique to a ring or clip holder and a shorter length.

Chinese staircase bracelet step-by-step diagram

To change colors smoothly, lift the current color out of the bottom slit, select the next color, and reinsert the remaining strings. This keeps the workspace tidy and supports consistent tension as you work across lines of knots. A clipboard or ring helps stabilize the work surface and can make the process easier for beginners or younger crafters.

chinese ladder tutorial (beginner) || friendship bracelets

For gifting, select three colors that the recipient likes and cut them to 32 inches. Hold all three strings and create a loop near the top, then pull the strings through to tie the knot. Tape the string to the table above the knot and begin with the first color, working as described to form Ds around the back and through the big loop, pulling to the top and tightening. Continue with the next colors and repeat until the bracelet reaches the desired length. This approach yields a bright, personalized piece that’s both fun to wear and a thoughtful handmade gift.

Tips and common pitfalls

  • Keep knots tight and adjacent to the previous knot so you don’t see the center strings beneath the pink or other colors.
  • When changing colors, remove the current color from the bottom slit and reinsert the others with the new color ready to weave.
  • A safety pin or paper clip can help stabilize the string loop if you’re working without a clipboard.
  • Don’t tug aggressively if a knot looks off-steadily adjust and re-tighten to avoid loosening or distortion.

With practice, you can experiment with longer strings, more colors, and multiple strings per side to create even thicker and more elaborate Chinese staircase designs. The color combinations are endless, and the results are always vibrant and personal.

tags: #chinese #staircase #gimp