When you’re creating portraits, flyaway hairs or awkward facial hair can distract from the overall look and feel of your work. With the Healing Brush and Spot Healing Brush tools, you can paint over stray hairs and Photoshop will blend them seamlessly into the existing background. Select it: Duplicate your layer before starting.
Different approaches to removing hair
Flyaway hairs on a background can distract from the overall composition you’re working toward. Sample it: Hold Alt on Windows or Command on Mac to switch to the Eyedropper tool and click to sample a piece of the background you want to paint with. Your adventures with hair don’t have to stop with removing strays.
Blemishes, imperfections, and distortions in a photo can be distracting to a viewer. Coffee stains, crowns, and cavities, oh my. Flyaway hairs can distract from the overall look and feel of your work.
Start by importing your photo into Photoshop. In the Channels panel, pick the channel with the greatest contrast between the subject and the background. Press Ctrl/Command + L to open the Levels Tool. Select the Brush Tool from the toolbar on the left.
Since we don't have the original image as a reference, it's easy to make mistakes when using the brush. As shown below, when you display both channels together, the subject will appear as a light red selection instead of a solid black one. Hold Ctrl/Command and click on the channel thumbnail to create a selection. Then, click on the RGB channel layer, and return to the Layers panel. Press Ctrl/Command + J to duplicate the selected area onto a new layer.
For further refinements, like cleaning up the hair edges, use the Dodge Tool to carefully enhance the edges. As you can see, using channels to cut out hair might seem simple, but it's actually quite challenging. In fact, using channels to extract hair was a popular Photoshop technique over a decade ago. While these older methods can deliver good results, they require meticulous attention to detail and a lot of time.
The second method uses the Object Selection Tool to cut out the subject and Select and Mask to refine the hair details. Select the Object Selection Tool from the toolbar on the left. But we're not done yet! First, change the View Mode to Transparency. With these simple steps, you can easily achieve a clean and detailed cutout, especially for tricky areas like hair. No matter which method you choose, tasks like zooming in on the image, adjusting brush size, and fine-tuning sliders are unavoidable. That's where a tool like TourBox comes in. With TourBox, you can quickly zoom in on details, refine edges, or adjust feathering and contrast with smooth, precise controls. Not only does it save you time, but it also lets you focus on your creativity.
Practical workflow: from image to clean cutout
In this tutorial we are going to learn the best way to cut out difficult images from their background in Photoshop. I’m not talking about solid shapes and people against green screens. I’m talking about hair and irregular edges against less-than perfect backgrounds. You know, the kind of thing that you have to deal with in the real world, not just for tutorials. So let’s have a stab at extracting a woman wearing a feather head dress. To make it more fun, we will use a colored background that is similar in color to the feathers… one one side, and completely different on the other side. Sound challenging enough?
Make a duplicate layer of the image. This way the original is preserved on the background and we are working on a duplicated layer. Hide the background by clicking off its visibility icon. Choose Select>Color Range from the Menu. When the Color Range Dialog box open, choose the Left Eye Dropper tool and click on the background color in the image window (pink). You will see the selected color turn white in the dialog box. Move the Fuzziness slider until the image is mostly black and the background is a clean as you can get it. Tip: To add a color to the selection click on the eyedropper tool with the plus sign and click in the image.
With the selection active, switch to the Channels palette. Click the save selection as channel button, it’s the second one to the left on the bottom of the channels palette. A new alpha channel will now be visible. Press “Ctrl/Cmd+D” to Deselect and click on Alpha 1 in the channels palette. The main window will now turn black and white. The advantage of using a channel is the ability to fine tune the selection without effecting the original image. Notice that there are areas of gray, these would be semi-transparent and need to become solid black and white (except for areas that should be semi transparent such as soft edges). There are tiny dots also visible, there will make for a very messy selection.
In the levels Dialog box, click the black point slider on the left and drag it to the right until the gray areas have become a solid black, Slide the White point slider to the left until the whites are nice and clean and the grainy effect has gone. Time to fine tune the mask. Choose a black brush and make the edge hard. Paint over all the areas that belong in the object to mask out. Use a larger brush for large areas and a smaller brush for finer detail such as around the feathers. Sometimes it can be hard to guess which part of the image belongs in the foreground and a peek at the original image is needed. Click on eye icon to the left of RGB at the top of the Channels palette (Fig 5). The original photo is now visible and the mask appears as a reddish color. Click the eye icon to go back to the mask view. The mask can also be hidden by toggling the eye (visibility icon). Hold Cmd(Ctrl PC) and click on the Alpha 1 thumbnail. You will now see an active selection. Click on RGB to see the color image. If it looks the opposite, click on the layer mask and press Ctrl/Cmd+I to invert the mask. If there are areas that still need to be removes such as on the right side of this image, repeat the proceeding steps. Because each image is unique, some will need several passes and some can be done in a single pass. As you can see, this technique is very effective and the image can be dropped onto any background. Look at the top left of the image to see how precise the cut out is on the detailed feathers.
How to make jaw dropping photo realistic embosses in Photoshop. Clipping a subject from its background is one of the fundamental procedures that is required for a variety of Photoshop projects. I’ve covered the best selection methods for a range of situations in my video titled How To Cut Anything Out in Photoshop, but cutting out hair always proves to be the most challenging, especially when dark or detailed backgrounds are involved where there isn’t sufficient contrast between the portion you want to keep and the areas you don’t. If you have a subject with relatively short hair or fur that has good contrast with the background, like this photo by Ayo Ogunseinde, Select and Mask tool is a reliable tool to produce a clean clipping. Begin by tracing the subject with the Quick Selection tool. Correct any mistakes by holding the ALT key and paint with the Quick Selection tool to add portions of the subject back in, that might have been missed. As well as the various sliders that allow you to fine tune the outline as a whole, the Refine Edge brush is ideal for perfecting hair selections.
In the Channels panel, find the channel with the most contrast. In this example of A Happy Guy in Spectacles from Shutterstock, the hair is darkest in the Blue channel. Use the Levels or Curves tools from the Image > Adjustments menu to set the background as the white point. A silhouette of the subject needs to be created for the mask to make a full selection. Select the Burn tool and set the option to Shadows in the top toolbar. Hold the CMD key (or CTRL key on Windows) while clicking the new channel thumbnail to load its selection. In the real world, your source photographs aren’t always conveniently shot against a perfectly lit studio backdrop. Things start to get tricky when there’s no contrast between the subject and its background. Use the Pen tool, or Polygonal Lasso tool to manually trace the subject. When it comes to the hair, just make a rough selection of the main body of hair. Rather than try to rescue the hair from the original photograph, just paint in some new hair! Set the opacity of the original layer to around 70% as a reference for where the hair needs adding, then begin drawing new strands of hair in the relevant directions. Begin with a brush size of around 4px, then gradually reduce the size to add finer hair strands. As the subject’s hair gets longer, it becomes too difficult to manually draw the hair back in. Make a selection of the subject as accurate as possible and apply a layer mask. Rather than paint in individual hair strands, Photoshop hair brushes provide a series of curls and ringlets that can help generate a completely new outline. Each brush can be scaled in size with the [ and ] keys and rotated by adjusting the angle icon within the Brush Settings panel. Make a single click with a brush, then find an alternative lock of hair to use in a different part of the outline. Change the blending mode of the hair layer to Hue so the original subject is still visible. Photoshop brushes of long flowing locks of hair aren’t going to be suitable for all hair types, but the same technique can be applied to other hair styles. It just involves finding an alternative portrait of a person with similar hair that is selectable against a clean background. This photo of a Beautiful Afro Business Man from Shutterstock features a similar hair style that is selectable using the Channels method. Trim the canvas to contain the hair silhouette, then go to Edit > Define Brush Preset. Change the new hair layer to Hue so the subject is still visible. This brush can also be used to remove the hard outline from the original clipping. Apply a layer mask to the new hair layer and erase the portion that overlaps the face to remove any discolouration.

Cut Out Hair FAST Photoshop Tutorial
Table: Quick reference of methods
| Method | Best for | Key steps |
|---|---|---|
| Channel-based cutting | Detailed edges on high-contrast backgrounds | Sample channel, save alpha, refine mask |
| Object Selection + Select and Mask | General subjects with tricky edges | View Mode: Transparency, refine edges |
| Manual brush + masks | Creative restoration or replacement hair | Brush to paint new strands, hide background, adjust hue |
In the real world, background complexity often requires flexible approaches. If you have a subject with relatively short hair or fur that has good contrast with the background, Select and Mask can be a reliable tool to produce a clean clipping. Begin by tracing the subject with the Quick Selection tool, correct mistakes with ALT, and use the Refine Edge brush for precise hair selections. For difficult backgrounds, consider painting in new hair using brushes and adjusting the blending mode to Hue to maintain realism. The technique can be adapted to various hair types by selecting alternative reference portraits against clean backgrounds, and by trimming the canvas to focus on the hair silhouette before defining a brush preset. The goal is a precise, natural-looking cutout that blends seamlessly with any chosen background.