There are two types of fill layers: solid color fill, gradient fill and pattern fill. A fill layer has a parameter (the color, the gradient or the pattern). Of course, there are many ways how to produce a layer filled with the color the gradient or the pattern. E.g. Fill layers have several advantages. Fill parameters (the color, the gradient or the pattern) can be easily modified. Press Layer - New Fill Layer in the top menu to add a new fill layer.
Adjustment layers are the special kind of layers. Imagine that you have a photo and you want to make it black and white (grayscale). Press Layer - New Adjustment Layer in the top menu to add a new adjustment layer. Just like any other layers, fill layers and adjustment layers can have their own blend mode, opacity, masks etc.
For direct raster layers, the pixel information is the only information we have. Undirect layers are e.g. We can not do pixel-specific operations on these layers (e.g. right-click - Rasterize, or Layer - Rasterize). In PSD files, any layer can have the clipping mask option enabled. Here we can see a text layer containing Photopea, and the photo of grass on top of it. the whole text.
We already know layers. We can think of a layer mask as an extra image, attached to the layer. as that layer (so each pixel of the mask has a corresponding pixel in the layer). it can be black and white only. that corresponding pixels of the layer are shown. Each layer can have at most one raster mask and at most one vector mask. We can enable or disable each mask. It can be enabled again at any time. Any change to the layer (e.g. drawing with a Brush tool, rotation etc.) can be applied to the mask, too. Masks can be linked to the main content of the layer. the main content is also moved. you can see some properties of the mask. 0% corresponds to no mask, values in between can be useful too). (i.e. it removes sharp edges between white and black areas of the mask). Note, that these properties do not change the actual content of the mask.
There are two kinds of masks: raster masks and vector masks. The raster mask is a simple grayscale image, that consists of pixels. The vector mask consists of vector shapes, that are made of Bézier curves. (by editing Bézier curves). Simple, clear, and very helpful for beginners. The lessons were practical and helped me improve my creativity and design skills.
Unlock the fundamentals of graphic design with our explorative approach to layer masks in Photopea. This training helps you learn how to utilize masks for non-destructive edits and precise selections.
Let’s start by understanding what layer masks are. Layer Masks are used to edit images non-destructively. When using masks, another layer is added to the main layer. The most important thing to learn is - The colour white reveals & black hides. If you’ve got a selection and you add a mask, you’ll notice that the mask will hide everything & leave the selected part visible. The first step is to import the image into Photopea. The image contains a man walking on the beach with a blue sky in the background. We will create a duplicate of the layer, rename the background layer to Destructive, and layer 1 to Non-Destructive, and hide the non-destructive layer for now.
Let’s say we wanted to eliminate some portions of the image. I’ll make use of the Rectangle Select tool, select a portion of the image, and just select Delete. The area that had been included in our selection had been delete forever, and cannot be recalled if needed in the future. All we were able to accomplish was press Ctrl+Z and reset, but what if we’d created a number of edits? To work non-destructively, we can use layer masks, which allow us to hide a portion of the layer, without permanently erasing that pixel data. I’ll hide the Destructive layer, and unhide and select the non-destructive layer.
In this tutorial, we’ll be examining the Raster Mask choice, but Vector Masks operate similarly. To add a raster mask, you can click on Add Raster Mask, under the Layers panel. Or you can go to the Layer menu, to Raster Mask, and add from there. We’ll take a look at those options shortly, but for right now, let s click on Add Raster Mask under the Layers panel. Next to the base layer, we added another mask, and now we have a little thumbnail, showing us the mask. If you hold Alt and click on the mask thumbnail, the mask will be displayed on the canvas. I’ll Alt+Click the mask to hide it, and switch to the brush tool. Anywhere we paint black, the image is hidden behind the mask, but if you’d like to bring some of the image back, you can enable the brush tool and set the foreground color to white. Start painting with the mask you selected in place to reveal. So we can work non-destructively, hiding or revealing anything you went through, at any time. If I Alt-Click the mask once again, you’ll be able to see what the mask looks like. You can also delete a mask by choosing Alt+Click it. The opacity of the mask can be modified through the Density slider, which you can set up to a maximum of 255. After this, the mask will appear with all the opacity you have set, similar to how it is if you paint it on the primary mask layer. Next, we have Feather. Feather slightly blurs the outer edges of any masked regions, which can result in a natural-looking transition from masked to unmasked areas.
We can even add a mask from/to a selection. I’ll eliminate the mask that we currently have on this layer, by right-clicking it and selecting delete raster mask. Then, I’ll utilize the quick selection tool to make a selection of the car. It’s not an optimal selection, but it will do for this example. Once you have your selection, go to Layer, and go to Raster Mask. The options are Add Reveal all and Add Hide All. When we created a mask using the layer panel, it was Add Reveal all. Add Hide all acted the opposite. The mask is produced according to your option, either hiding or revealing your selected area. Let’s choose to reveal the selection, first. As you can see, it has formed a mask and shown just the portion of our selection, hiding the rest of it.
But, this isn’t what I want. Let’s add a black layer under the layer we are working on. The layers panel will list a New Adjustment Layer command. When it comes up, click on the Color Fill button and choose a solid black color. I want to move the layer mask, but if I choose the mask and move it with the Move tool, it will be moved together with the layer and mask, because they are both linked. If you choose to move only the mask, hang up this icon to the left of the layer, to completely separate them. Now, we can move freely one from to the other. If you have a mask selected and drag it to the left, we’ll place the mask behind the subject. I will copy the layer and then delete the mask.
Using a mask on a layer is a great option when you want to hide something non-destructively, but one of the most powerful actions you can take with Masks is to use them on Adjustment Layers. I will switch back to the second image, add a new Adjustment Layer, and choose the Hue Saturation option. We all have the Hue Saturation Adjustment layer, which automatically has its very own mask layer. At the moment, if we change the intensity of the hue, the whole image shows up here. I’ll use the same selection as before to change the colour of the background. Click on the Hue/Saturation Mask & fill it with black. With the Hue Saturation Mask selected, I will fill the selection with black, masking those areas of the image unaffected by the hue. We can now change the hue and saturation without altering all of the image. Masks are a great way to enhance your pictures in Photopea.
This tutorial explains different ways you can utilize this amazing tool to get great results in Photopea. I hope this tutorial has helped you in transforming your images according to your desires and expectations. At first, removing a background could be seen as a tedious/difficult process. However, after some practice you’ll quickly notice that the process is not that difficult. In general, this technique is very functional & scalable. Does need some practice to understand the essence of all the tools, however, it is a great technique to learn. So this tutorial is gonna be done in Photopea because my photoshop is a brat right now. Today going to go over CLIPPING MASK and ANOTHER MASK (In photopea it is called RASTER MASK). Bonus talking about how a raster mask can be fun with the greyscale as well.
I prefer to use Raster mask for things. Having trouble with photoshop or photopea? Have questions that seem “basic or too dumb” to ask? that’s okay! I’m making tutorials for it all! Send in a request. Please like / reblog if you find this helpful. I know this kind of tutorial has been done before but I wanted to make one to link in my tutorials instead of constantly repeating steps. We are gonna clip / mask on the circle with this imagePaste / drag etc the image to your canvas.
Make sure you have your shape layer selected. So the gif above shows you what you need to do. You need to select the image / the shape and then it flicks to what it looks like being selected. Please ignore the fact the placement and size of the canvas and picture you are working with has changed. My photopea reloaded and I had to quickly do this again. This is then you want a new folder (this is just how I do it. It works better when you are mass editing, making a lot of the same if you folder it) and drag the image you want to be a circle / your shape into your folder.
Now what is the difference between the BLACK and the WHITE? Black is going to make it so you see NOTHING in that selected area. White is you see it ALL. What the image looks like once you have RASTER masked it.
Clipping masks and the clipping workflow
ONTO how to do a clipping mask. Select the layer that you want to be CLIPPED onto a shape. Right click and find CLIPPING MASK and hit it. The down arrow connected to your image means it is clipped to that shape. Your clipping mask end result looks the same as the Raster masked result.
Another thing about raster masks that is cool is if you go ahead and make your image a mask layer (In a group or just the image itself) and use a paint brush and PAINT on the white part in different colors or shades of gray scale, your level of how much is seen and how much is transparent changes. I painted a little bit of the left-hand side in shade closer to black Is what it did to my image. I painted the other side closer to white and that is what it looks like. It is to show you what it looks like on my blog, the transparency different. This tutorial is for those who would like to clip a photo, paper or even elements to a photo mask.

For the purpose of this tutorial I used a photo mask from my Orchard Traditions bundle which can found here. Here in the New Project box you can set your Name, which I left as New Project, and I created a 12×12 workspace. To do that select inches from the dropdown, type 12 in width, and 12 in height. [It will add the decimals automatically.] In the DPI box set it to 300. Then click the Create button below those settings. Now go back to File and click Open & Place. This will bring up a dialog box to browse your hard drive. Choose your photo mask and click Open. This will now place your photo mask on to your 12×12 New Project.
Photopea Raster Mask (Layer Mask) Explained
Now if you do not see a Layers panel see the next step otherwise skip to Step #5. If you do not see a Layers panel select Window and then Layers. A checkbox will appear which which then unhide the Layers panel for you to access. Now it’s time to add your photo. We are going to do the same as we did in step 3. Go to File and then click Open & Place. Again this will bring up a dialog box to browse your hard drive. Choose your photo and click Open. When it places your photo you might notice it is smaller than it’s original size. You should be able to see a bar above your project which has some numbers on it. In between the W & the first H boxes, which are the width & height on your selected image, you will notice 3 little lines. Be sure to click on that. Now type 100 in the W box. H should automatically update to 100 as well. If not check that box with the 3 lines again. I circled where your photo layer is in the Layers panel. Your photo should still be selected in the Layers panel. Right click on it and a menu will appear. Click on Clipping Mask. This will clip your photo to the mask and as you will see a bent arrow will appear next to it which indicates it is clipped to the layer below, as shown on the other screenshot of this step. This completes clipping a photo to a photo mask.

But what if its not where you would like it and need to move it? Continue to the next step. Be sure your photo is still selected in the Layers panel. Just click on it, if it is not. Now find your way to the Move tool on your tools box which is on the left side of the application. Now just drag it around in your photo mask until you are happy with its placement. To save your file you can click on File and then Save as PSD, which will open a dialog to your hard drive to save. However, at least from my browser Opera, the file that it saved from that method did not seem to work. After saving, and trying to open it in my Adobe Photoshop it gave me an error. But I found that Save as PSD/PSB worked just fine. To do that just click File then click Save as PSD/PSB. In the box that pops up be sure PSD is selected and then click Save New Project.psd. [New Project.psd is actually whatever your file name is which can be set in Step #1] It will then download it to your current downloads folder for your browser. That’s it!