ibisPaint offers a wide variety of Blending Modes (Combination Mode, Drawing Mode). Drawing on separate layers is a unique feature and advantage of digital illustration. Blending Modes allow you to choose how the colors of the upper and lower layers are combined. Digital colors are managed and displayed numerically. Blending Modes are perfect for expressing light and shadow. Blending Modes are a handy tool, but they do take some practice to fully grasp and utilize effectively. Simply reading about them might not be enough to truly understand how they work.
To change the Blending Mode, open the Layer Window by pressing the Layer Button and tap on Blending Mode list to choose a Blending Mode. On the image above, the left picture is the lower layer, and the right picture is the upper layer. To be precise, semi-transparent areas will appear as if cellophane has been placed over them.
How Blending Modes Determine Color Interaction
It compares the values of each of the RGB colors and displays the color with the lower (darker) value for each. [Multiply] … Colors become darker. This mode multiplies the color of the lower layer with the color of the upper layer. It is effective when painting areas that should be darker, such as shadows on skin or hair. This Blending Mode literally multiplies the RGB values of the lower and upper layers for each color. In ibisPaint, color brightness is represented by values ranging from 0.0 to 1.0. If you color the upper layer with a brightness of 0.5, it will be blended with the lower layer, resulting in a brightness that is half of the lower layer's brightness (in other words, multiplied by 0.5, which is why this is called "Multiply"). If you color the upper layer with a brightness of 0.33, it will be blended with the lower layer, resulting in a brightness that is one-third of the lower layer's brightness.
To extract only the R channel of RGB, place a layer filled with red (R=255, G=0, B=0) above the target layer and set it to [Multiply]. To darken a photo or illustration while strengthening its impression, duplicate the photo or illustration, change the blending mode to [ Color Burn ], and overlay it on top.
[ Linear Burn ] … Unlike [ Color Burn ], this mode darkens the entire image evenly, both dark and light areas. Details in the dark areas may become difficult to see as they turn black. It compares the total RGB values of the lower and upper layers and displays the color with the lower (darker) value as is.
For example, when combining light blue (R=114, G=210, B=255) and red (R=255, G=0, B=0), the total value of light blue is 579 and the total value of red is 255. It compares the values of each of the RGB colors and displays the color with the higher (lighter) value for each. [ Screen ] … This mode brightens the image while maintaining the original ratio of light and dark.
[ Color Dodge ] … Brightens the bright areas of the image. It is effective when you want to brighten the image while increasing contrast. Brightening the entire image can cause bright areas to whiteout (become pure white), so this mode is a way to brighten the image while increasing contrast without having the bright areas whitened out. To brighten a photo or illustration while strengthening its impression, duplicate the photo or illustration, change the blending mode to [ Color Dodge ], and overlay it on top. This will increase the contrast and brighten the image while making it more vivid.
[ Linear Dodge ] … Unlike [ Color Dodge ], this mode brightens the entire image evenly, both dark and light areas. Details in the bright areas may become difficult to see as they turn white. To brighten only a specific color overall, simply paint with the desired color. In the [ Multiply ] section, we explained how to separate RGB channels. If you combine the separated RGB channels using [Linear Dodge], they will return to their original state.
[ Add ] … This mode results in the brightest colors. It is effective for expressing highlights or light sources. When the opacity is 100%, there is no difference between [ Linear Dodge ] and [ Add ]. However, in areas where the opacity is lowered, [ Add ] becomes much brighter. Therefore, it is effective for drawing glowing parts. Since each RGB value is added (addition), if you want to brighten specific colors strongly, simply paint with the desired color. It compares the total RGB values of the lower and upper layers and displays the color with the higher (lighter) value as is. For example, when combining light blue (R=114, G=210, B=255) and red (R=255, G=0, B=0), the total value of light blue is 579, and the total value of red is 255.
[ Overlay ] … Darkens dark areas and brightens light areas. The pure black (R=0, G=0, B=0) and pure white (R=255, G=255, B=255) areas of the lower layer will not change, regardless of the color overlaid on top. Overlaying the same image with [ Overlay ] will result in increased vibrancy. Even if the lower layer is colored, overlaying another layer can alter the hue.
[ Soft Light ] … This mode slightly darkens dark areas and slightly brightens light areas. It has a similar effect to [ Overlay ] but with a softer touch. Use this mode when the [ Overlay ] effect is too strong.
[ Hard Light ] … This mode makes dark areas very dark and light areas very light, while also increasing saturation. It has a similar effect to [ Overlay ] but with a more intense result. Use this mode when you want the upper layer color to feel like it is directly shining onto the lower layer.
[ Vivid Light ] … This mode makes dark areas darker, light areas lighter, and further increases contrast. [ Linear Light ] … This mode makes dark areas even darker, light areas even lighter, and further increases contrast. [ Pin Light ] … If the color of the upper layer is bright, it compares the brightness of the lower and upper layers and results in the lighter of the two colors. [ Hard Mix ] … This is the most extreme Blending Mode. This mode forces each RGB channel to either 0 or 255, so only eight colors will appear: black, red, green, yellow, blue, magenta, cyan, and white. If the sum of the RGB values of the upper and lower layers is less than 255, it is set to 0; if it is 255 or more, it is set to 255.
[ Invert ] … Inverts the color of the painted area. This mode subtracts each RGB value of the lower layer color from 255. Invert results in an effect like a negative film. For each RGB channel, the smaller value is subtracted from the larger one. Since it's a subtraction, the colors will become darker. For example, combining light blue (R=114, G=210, B=255) and gray (R=127, G=127, B=127) results in dark blue (R=13, G=83, B=128). If the color of the upper layer is black (R=0, G=0, B=0), there will be no change. It can also be used when comparing two images.
[ Exclusion ] … Areas where the lower and upper layers have the same color will become darker, while areas with greater color differences will become brighter. For each RGB channel, the value of the upper layer is subtracted from the value of the lower layer. This is literally the subtraction Blending Mode. Since it involves subtraction, the colors become darker. For each RGB channel, the value of the lower layer is divided by the value of the upper layer. Since it involves division, the colors become brighter. You can also use it to make the paper white when importing a picture with the line art.
Layer 3 (Division): Pick up the color of the paper with the Eyedropper to color the entire surface with that color. Layer 2 (Multiply): The lines drawn on the paper are imported as a photo. Layer 1 (Normal): This layer is used as the working layer and for coloring. Changes the hue of the lower layer according to the hue of the upper layer. Changes the saturation of the lower layer according to the saturation of the upper layer. You can turn a picture into black and white by creating a layer filled with pure white (or pure black) and setting its Blending Mode to [ Saturation ]. Changes the hue and saturation of the lower layer according to the hue and saturation of the upper layer. In this Blending Mode, luminosity refers to the lightness of a color when converted to grayscale. This mode changes the lightness of the lower layer according to the lightness of the upper layer.
There are many Blending Modes, but the most commonly used ones are [Normal], [ Multiply ], [ Add ], [ Overlay ], and [ Screen ]. [ Multiply ] is often used for adding shadows. If you want to apply a blending mode to a specific layer only, use clipping. [ Add ] is often used for adding light sources and highlights. [ Overlay ] can be used to change the color tone of an image. It's often used to transform the color of the sky from day to night or to change a person's hair color from brown to blue.
On the image above, a layer filled with orange is added between the background and the character, and the blending mode is set to [ Overlay ]. Next is the color fill, but in order to do that let's learn how to use the Color window. First of all select the Brush tool. Then, tap the square icon on the Main Toolbar to open the Color window.
Color window overview ① Current Color ② Previous Color (this is Current Color at the time you opened the window) ③ Color Circle and HSB box ④ Hex Color Code ⑤ Hue slider (H) ⑥ Saturation slider (S) ⑦ Brightness slider (B) ⑧ Opacity slider ⑨ HSB/Palette Toggle button ⑩ HSB/RGB Toggle button. When you want to create a color, drag the picker inside the Color Circle and HSB box, and adjust the sliders. HSB stands for Hue, Saturation, and Brightness. Dragging the picker changes the Current Color so be sure to take notice while adjusting the color settings. RGB stands for the three colors that make up the light we perceive - Red, Green and Blue. To do this, tap the HSB/RGB Toggle button to toggle between HSB and RGB. The RGB slider will be displayed. To return to the HSB slider simply tap the HSB/RGB Toggle button again. You may also tap on Hex Color Code to bring up the input dialog and enter the Color Code manually. The Palette Screen is for saving and selecting frequently used colors. Tap the HSB/Palette Toggle button. ①Color Palette ②Color History ③HSB/Palette Toggle button. A palette like the one above has been prepared in the default settings for Color Palette. In this palette, try storing a color that you have made. In Color History, you can reselect a color that you used in the past. Holding down and drag the current color to automatically move to the palette screen. Drop the color into an open space down the bottom to save it into the palette. It's useful to save colors you like, such as two colors that make up skin color, in this way. When you engage in brush drawing or paint over something, Color History will display the colors you used at those times. You can select a color by tapping the color in Color History. You can store a maximum of 100 colors.
Practical Tips for Effective Color Mixing
Use clipping to apply a blending mode to a specific layer only, keeping other layers unaffected. Experiment with layers: place a colored fill between the background and the character and adjust the Overlay blending mode to shift mood and color tone. When aiming for controlled highlight and glow, Add or Linear Dodge on a top layer can intensify brightness without washing out the underlying tones.
To study how modes interact, compare two versions of a scene: one with a base layer, another with a top layer applying a chosen blending mode. Observe how shadows, midtones, and highlights shift as you switch modes, and note which modes preserve line work while enriching color depth.
For skin tones, Multiply can deepen shadows naturally, while Overlay can shift color warmth or coolness without losing the base hue. For skies or hair, Overlay and Soft Light provide vibrant color shifts, whereas Screen or Color Dodge can lift bright areas with pronounced contrast. For metallics or neon effects, Add and Linear Dodge give intense glow and spark.
Example Workflow
- Set up a clean base with a normal layer for line art and flat colors.
- Duplicate the scene on a new layer and switch blending mode to Multiply to build shadows.
- Create another top layer and apply Overlay, adding a color wash that shifts hue and increases vibrancy.
- If colors become too strong, reduce top layer opacity or use clipping to limit the effect to targeted areas.
- Finish with a final top layer using Screen or Add to add highlight details where needed.
Commonly used blending modes to start with: Normal, Multiply, Add, Overlay, and Screen. These cover shading, light sources, color shifts, and overall tone adjustments. For color control and experimentation, use the Color window to create harmonious palettes and save preferred combinations in the Palette for quick reuse. Color History keeps track of recent colors to streamline iterative adjustments.

How to Use Layer Modes in Digital Art // Multiply, Overlay, etc.
Note: You can apply blending modes to specific layers only using clipping for precise control.
In practice, mastering blending modes is about repetition and careful observation of how colors interact on different layers and under different opacity settings. Begin with a handful of modes and build your intuition toward more complex combinations to achieve desired lighting, mood, and color relationships across your artwork.