Lens flare is a creative effect that can illuminate your photos with a unique starburst or soft bokeh look. Starbursts, halos, and more can add a dramatic touch to photos, whether you’re shooting into the sun or using artificial lights in the studio. You can even create a lens flare from scratch in Adobe Photoshop.
Lens flare can happen when a bright light source hits your camera’s lens. This light can show up in the form of circles, rings, starbursts, or an allover haze in your photo. Lens flare can add a warm softness to backlit portraits, define landscape shots, and help you naturally achieve a cinematic or sun-drenched look. Lens flare often appears in photographs as circles or rings that emanate from the light source. These visible spots, or artifacts, are called ghosting. In some cases, a haze of light covers the entire scene, which can result in washed-out, low contrast photos. This allover haze is called veiling, and it occurs when the light source is out of the frame and to the side of your lens, but the rays still hit the lens’s front element. Veiling can be used intentionally to create a soft, warm mood for your photo.
Understanding the basics and creative potential
A starburst effect happens when you shoot with a smaller aperture, such as f/11 or f/16. Aperture is the adjustable lens opening that controls the amount of light allowed into the camera. Used in cinematography, anamorphic lenses capture a wider field of view without distortion. This is made possible, in part, by their square shape and horizontal lens elements. This shape is also what produces the distinct horizontal flares these lenses are known for. Director J. J. Abrams is well documented for his use of anamorphic lens flares.
To get lens flare, shoot directly into the sun or another light source. “The best thing you can do is shoot at a lot of different angles, so that even if some are blown out, you can see what works and what doesn’t work,” says photographer Martha Galvan. It may take some trial and error, since how your flare shows up depends on a number of factors. Different equipment produces different results when it comes to lens flare. Most modern lenses come with an antireflective coating designed to avoid glare. Because of this, you may find more success capturing lens flare when you use an older lens. UV filters, polarizers, or neutral density filters can also reduce the amount of flare you pick up. Zoom lenses produce more sun flare effects, as the increased number of lens elements amplifies the number of internal reflections within the camera, which cause lens flare. Aperture has a huge effect on the outcome of your flare. At wider apertures, the sun appears larger and more diffused, and the flares are softer shapes. If you choose to shoot wide open, watch for the narrow depth of field and make sure your subject is in focus.
Lightroom workflow: create sun flare using Radial Gradient
Quick answer: To create a realistic sun flare in Lightroom, add a Radial Gradient near the light source. Then, warm it with the Temp slider, raise Exposure, and lower Clarity to soften the glow. Position the mask so the light spills naturally into the frame.
Step-by-step approach: In Lightroom, start from your original image and use masking to craft the flare. Step One: Here’s our original image. Step Two: Click on the Masking icon (seen circled here), in the toolbox beneath the histogram. From the panel of tools that appears, click on the Radial Gradient (as shown here; or press Shift-M). Before you click-and-drag the sun flare out, drag the Temp slider way over to the yellow side. Here, I dragged it over to 65. Next, crank up the Exposure (it is the sun, ya know). In this case, I dragged it over to the right to 2.45, so basically adding about 2-1/2 extra stops of exposure. Now, click-and-drag the sun flare out in the top-right corner (as seen here). Notice the position of the oval here. Step Three: Next, we’re going to add some negative Clarity to soften our sun flare, so drag the Clarity slider way over to the left (here, I dragged it over to -60). Don’t forget- you can reposition your sun flare any time by clicking on the little black edit pin. Then drag it right where you want it. Step Four: To make the effect look more realistic, you’re going to need to somewhat match up the color of the rest of the image with the very warm color you just added with this sun flare. So, click the Done button at the bottom right of the Preview area. Then go to the Basic panel and drag the Temp slider over to the right until the color blends in with the color of the sun flare. Here, I dragged it to +41. To finish things off, back off the contrast a bunch (one of the rare times I add negative contrast, but in this case, with the sun bursting in, it helps sell the look). Lowering the contrast of the rest of the image helps with this effect. Here, I dragged the Contrast slider down to -63. I also ended up dragging the Dehaze slider a little to the left to -15.
TIP: Optional Second Method If you’re not comfortable using the Radial Gradient yet, you can use the Brush tool (K) instead. A believable sun flare works because the mask, warmth, exposure, and contrast all support the existing light in the scene. Sunflares can add dynamic interest to a photo, but sometimes they aren’t present in a scene. This is where Lightroom’s powerful editing tools come into play. In this article, we’ll dive into the process of adding a sunflare in Lightroom to add interest and appeal to your images.
Practical tips for real-world shooting
In the image you’re looking at, notice how the main natural light fills the face, instead of illuminating from behind. Typically, sunflare photography is characterized by strong light flares emanating from behind the subject. However, in this case, the sky didn’t allow for enough sunlight to peek through. If you attempt to add a sun flare using a local adjustment brush, you’ll find that the result might not be entirely convincing. This is because matching the light direction with the desired effect is crucial for authenticity.
Now, turn your attention to the image below. Step 2. You can either create your own brush with the settings you see in the image above, or you can use the Retouching Toolkit by Visual Flow. With a quick drop of our Sun Flare Brush from the toolkit we were able to vamp up the scene and add a bit of life to the light. With a burst of Exposure and Highlights we are essentially creating, a mock golden hour sun, meant to enhance pre-existing sunlight but can also easily be used to transform a mundane sky when there is a clear direction of light. In the original file on the left, you can see that the direction of light is visible, highlighting the edges of the leaves but not powerful enough to create a rim light surrounding the subjects. Although this image above is from the same photoshoot, we can see that the natural ambient light has become stronger, most likely because the sun finally peeked out from the clouds. Capturing the enchanting essence of golden hour and sun flare photography carries a unique charm and allure. Replicating the depth and warmth of natural sunlight, complete with its rich orange tones and captivating flares, is no small task. However, with careful analysis of your scene and the appropriate techniques, achieving a believable effect is within reach. By following the steps outlined above, you can skillfully add a sunflare in Lightroom, elevating the beauty of your images.
Additional considerations
- Keep your lens clean to avoid unwanted artifacts that can mimic flare.
- Experiment with different angles and exposure settings to find the most convincing look.
- Balance flare intensity with overall exposure to maintain natural skin tones and scene mood.
Sun Glare. Whenever there is an intense light source, flare naturally occurs within a lens system. Light would reflect and scatter within it, and produce this round foreground bokeh effect. Because of this, this light anomaly began to be a sought-after effect in photos. The example above is a realistic application of this Lens Flare. Urban Flair. You can use this preset in urban scenes, too, to add a dramatic feel. See how it helps give off a sophisticated air in the After photo. It now seems like the photo is presenting the locale itself. A Feel of the Climate. This can also work well on travel photos, as a way to visually express the scene’s sunny climate. With this simple Lens Flare preset, you can express more about the urbanscape or landscape that you are in. Position and Perspective. Like all of our presets, you can absolutely use Lens Flare as is, right out of the box.
- To create a realistic sun flare in Lightroom, add a Radial Gradient near the light source.
- Then, warm it with the Temp slider, raise Exposure, and lower Clarity to soften the glow.
- Position the mask so the light spills naturally into the frame.
Sun flare effects are really popular right now, and thankfully, they’re pretty darn easy to do. Plus, there are two ways you can pull this off. Step One: Here’s our original image. Step Two: Click on the Masking icon (seen circled here), in the toolbox beneath the histogram. From the panel of tools that appears, click on the Radial Gradient (as shown here; or press Shift-M). Before you click-and-drag the sun flare out, drag the Temp slider way over to the yellow side. Here, I dragged it over to 65. Next, crank up the Exposure (it is the sun, ya know). In this case, I dragged it over to the right to 2.45, so basically adding about 2-1/2 extra stops of exposure. Now, click-and-drag the sun flare out in the top-right corner (as seen here). Notice the position of the oval here. Step Three: Next, we’re going to add some negative Clarity to soften our sun flare, so drag the Clarity slider way over to the left (here, I dragged it over to -60). Don’t forget- you can reposition your sun flare any time by clicking on the little black edit pin. Then drag it right where you want it. Step Four: To make the effect look more realistic, you’re going to need to somewhat match up the color of the rest of the image with the very warm color you just added with this sun flare. So, click the Done button at the bottom right of the Preview area. Then go to the Basic panel and drag the Temp slider over to the right until the color blends in with the color of the sun flare. Here, I dragged it to +41. To finish things off, back off the contrast a bunch (one of the rare times I add negative contrast, but in this case, with the sun bursting in, it helps sell the look). Lowering the contrast of the rest of the image helps with this effect. Here, I dragged the Contrast slider down to -63. I also ended up dragging the Dehaze slider a little to the left to -15.

Lightroom 4 Tutorial - Creating Lens Flare
In summary, you can add sun flare realistically by careful control of exposure, temperature, and clarity using Lightroom’s masking tools, especially the Radial Gradient, and by matching color and contrast to the scene for a believable result. Experimentation remains key to mastering the effect and adapting it to any subject or location.