This article compiles a detailed, beginner‑friendly workflow for creating and integrating bubbles into your photos using Photoshop. It covers both the manual construction of bubble shapes and the use of brushes and layer techniques to achieve a natural, three‑dimensional look. The instructions are drawn directly from the provided draft material and organized to maximize clarity and practical value.
Starting with two photos and preparing the composition
Open both photos in Photoshop that you want to merge together. Copy and paste the photo onto the other photo. The photos are both from different cameras, and the bubble photo is smaller than the photo of me taking a picture (please ignore the lens cap I edited it out of the final edit!).
Now it is smaller but it’s too small. You now have a layer mask on your top layer! This will allow you to add and subtract from the top layer via the paintbrush. The image after painting with the black paint brush. Image after bringing back some of the image. To gain the ability to see the bubble below it, reduce the opacity of the top layer. The opacity determines how “see through” the top layer is. By reducing the opacity we can see underneath it to better determine where the lines of the bubble are.
At this point, you could be “done” if you wanted to be. First, reduce the opacity of your brush, set it to around 5‑15 and paint over very select spots to make it look more 3D (the paintbrush at such a low opacity will only take off a tiny bit at a time vs a lot at a time). I chose to paint around the bubble (so there is less image on the outsides, so it’s strongest in the middle and most faded on the outside, helping it have the round appearance).
Creating and refining speech bubbles as vector shapes
Right click on your layer and select “duplicate layer”. Ensure the top layer is clicked on and click the dropdown arrow and select “overlay”.
Photoshop CC comes with a set of speech bubble shapes just waiting for you to use them, but they are hidden away a little bit. Photoshop comes with five basic shape tools - the Rectangle Tool, the Rounded Rectangle Tool, the Ellipse Tool, the Polygon Tool, and the Line Tool. Photoshop also comes has the Custom Shape Tool which allows us to create more interesting and complex shapes such as snowflakes, pawprints, light bulbs and speech bubbles. The really great thing about all of these tools is that they are Vector drawing tools. That means we can make the shapes bigger and smaller without any loss of quality.
Click and hold on the Rectangle on the toolbar to reveal the full set of vector drawing tools. On the Options bar at the top of the screen, make sure the first drop down option is set to Shape. This ensures that you are creating vector shapes which will either be filled with the colour and/or stroke colour you choose. Next, select a Fill colour. In this example, I’m using red. Leave the Stroke colour as empty and ignore the rest of the options except the actual Shape option. Drag out the shape in your image window. When you’ve dragged the speech bubble to the size you want, release the mouse.
Ok, now you have a lovely speech bubble, but let’s say red is not your colour. How do you change it? In the Layers panel, double-click on the thumbnail on the new Shape layer that you’ve just created. Simply choose whichever colour you like best by picking a base colour in the colour picker. You’ll notice that the nice thing about shape layers is, when you double-click on their thumbnail to change colour, you can try out lots of colours before clicking OK as the changes will happen as you move around the colour picker.
An alternative way to change colour is this: First make sure that the speech bubble is selected (it is selected when you can see the path and the anchor points of the shape). Then on the Options bar at the top of the screen, click on the Fill colour. You can choose to have No Color, which is the first option, a solid color, a gradient or a pattern. By default, the solid color is selected and when you choose one of the swatches below, it will instantly change to that colour.
With the Custom Shape Tool selected as before, go to the Options bar. Change the width of the stroke by clicking on the drop‑down menu and dragging the slider to the right to increase the thickness and to the left to decrease the thickness. You also have a choice of solid, dash or dotted lines on your stroke. Now you know how to create and modify a vector speech bubble, you might be wondering if that is the only speech bubble shape available in Photoshop. Well no, there are actually quite a few more hidden away for us to play with.
With the Custom Shape Tool selected, in the Options bar at the top of the Photoshop screen, click on the Shape drop down. A dialog box will open asking if you want to Replace or Append the current set of Shapes. Click on the bubble you want to draw and then click and drag out the shape on the image window.
I hope you’ve found this useful. I hope you’ve found this Photoshop’s tutorial useful and I would be really grateful if you would share it. Thank you so much! Get A Free Printable Photoshop Toolbar Cheatsheet Subscribe now to get a free printable poster showing all of the Photoshop tools and their keyboard shortcut.
Creating and using a custom bubble brush for painting many bubbles
Let's start by creating a new Photoshop document which we'll use to draw our bubble. This opens Photoshop's New Document dialog box. Enter 600 pixels for both the Width and Height of the new document and 72 pixels/inch for the Resolution. Finally, make sure the Background Contents option is set to White. Click OK when you're done to close out of the dialog box. Select the Elliptical Marquee Tool from the Tools panel. Hold down Shift+Alt (Win) / Shift+Option (Mac), click in the center of the document, then drag out an elliptical selection outline which will become the basic shape of our bubble. Holding the Shift key down as you drag is what forces the selection outline into a perfect circle, while holding the Alt (Win) / Option (Mac) key tells Photoshop to use the spot you clicked on as the center of the selection, extending it out in all directions from that spot.
This opens Photoshop's Layer Style dialog box set to the Inner Glow options in the middle column. First, change the Blend Mode from Screen to Multiply, which will turn our inner glow into an inner shadow. Click on the color swatch below the word "Noise" and choose black from the Color Picker. Click OK to close out of the Color Picker when you're done. Click on the words Gradient Overlay in the list of layer styles along the left side of the Layer Style dialog box. This changes the middle column of the Layer Style dialog box to the options for the Gradient Overlay. This opens the Gradient Editor. Select the black-to-white gradient from the list of Presets by clicking on its thumbnail. With the Layer Style dialog box still open, click in the center of the bubble in the document window and drag the black center of the gradient into the top left of the bubble to create a large highlight.
With the Brush Tool selected, make sure black is selected as your Foreground color by pressing the letter D on your keyboard. Hold down Ctrl/Command and click directly on the preview thumbnail for Layer 1 in the Layers panel. This will create a selection based on the bubble. Press Ctrl+F (or Command+F) twice to apply the same filter two more times to the image, sharpening the curved highlight over iterations.
Now that we've drawn our bubble, let's save it as a brush. Open the photo you want to add bubbles to. Click on the New Layer icon at the bottom of the Layers panel to add a new blank layer above the Background layer. Select the Brush Tool, right‑click inside the document and choose your bubble brush by clicking on its thumbnail in the Brush Preset picker. Press F5 to open Photoshop's main Brushes panel, which contains all of the Brush Dynamics options that allow us to control the behavior of the brush as we paint with it. Turn on Shape Dynamics and increase Size Jitter to 100%, and Roundness Jitter to 100% for varied bubble shapes. Then switch to Scattering and increase Scatter to around 250% to spread the bubbles randomly as you paint them.
Paint in white bubbles on Layer 1, starting with smaller dots and spacing them to form clusters. If you’re not happy with a stroke, undo with Ctrl+Z (Windows) or Command+Z (Mac) or use Ctrl+Alt+Z / Command+Option+Z for multiple undos. For best results, paint in short strokes from the bottom of the photo to the top and leave gaps to simulate natural bubble clusters. After painting, you can blur some bubbles to simulate depth by applying Gaussian Blur to a new layer or re‑applying blur selectively. Optional: add more layers to create depth, with larger bubbles closer to the viewer.
Here is a library of speech bubbles and tails for use with the custom shapes tool in Photoshop. You can download the Custom Shape library and copy it into the appropriate presets folder. When you open Photoshop and switch to the Custom shape tool, you can define shapes, stroke, and color to build a varied set of bubbles. The process includes loading a shape, transforming it with Free Transform Path, and adjusting color and stroke to taste. You can also use Legacy Shapes and More to access Talk Bubbles and other shapes.
In practice, you can combine the bubble creation with photo merging by placing the bubble layer above the background and adjusting its blending mode (Overlay, Screen, Multiply, etc.) to suit the underlying image. Layer masks can help refine edges and integrate bubbles with lighting and depth cues. The key steps involve creating a base bubble graphic (either as vector shapes or a custom brush), painting bubbles on separate layers, and using opacity, blur, and layer blending modes to achieve a natural look.

Photoshop Pattern Design Tutorial | Create a Seamless Pattern for Beginners
Remember that you can always use other image, not just bubble.
Практические советы по финальной компоновке
- Работайте на копиях слоев, чтобы сохранить оригиналы без изменений.
- Используйте маски слоя для точной подгонки прозрачности пузырей к окружению.
- Экспериментируйте с режимами наложения и параметрами размытия, чтобы пузырь выглядел естественно в воде или воздухе.
- Размещайте пузырьковые группы на разных слоях для управляемой глубины сцены.
Промежуточный итог по технике
Через сочетание векторных форм, собственных кистей и масок слоя можно получить реалистичные пузыри без чрезмерной сложности. Важны вариативность размеров, ракурсов и прозрачности, а также аккуратная работа со светом, бликами и тенью.