How to Slow a Clip Down in iMovie: A Comprehensive Guide

Speeding up and slowing down videos are very common in movie making. If you want to speed up videos in iMovie or slow down videos in iMovie and don't know how to achieve it, then you have come to the right place. This article will tell you what to do.

1. Basic method in iMovie for Mac: import, select, and adjust speed

Section 1. Step 1. Go to File > Import to import movies from your hard drive, or go to Import from Camera... After importing videos to iMovie, drag video clips from the Event browser to the Project. Step 2. Double-click the video clip in the Project Browser to bring out the Inspector window. You can drag the Speed slider to the left to make the clip play slower, or to the right to make it play faster. Or you can also set the exact speed percentage of the clip.

In the iMovie app on your Mac, select a clip in the timeline whose speed you want to change. To show the speed controls, click the Speed button. Choose either Slow or Fast from the Speed pop-up menu, and click a speed button to set the speed. Note: If you choose Fast for a clip shorter than 0.1 seconds, the Custom speed option is applied, and you can enter a custom speed. An icon (either a turtle or a rabbit) appears on the clip, and a speed slider appears at the top. A clip that is slowed down becomes longer in the timeline, and a clip that is sped up becomes shorter. Note: If the clip contains audio, playing the clip more slowly lowers the pitch of the audio, and playing the clip faster raises the pitch. To preserve the original pitch of the audio, select the Preserve Pitch checkbox above the viewer.

Modify a clip’s speed adjustments. In the iMovie app on your Mac, drag the speed slider at the top of a clip in the timeline that has speed changes. Dragging the slider to the right slows down the clip, and dragging the slider to the left speeds up the clip. Using the speed slider is useful for custom speed adjustments, because as you drag the slider, you see the clip’s duration change in the timeline.

2. Changing speed for a specific portion of a clip and looping effects

Change the speed of part of a clip. Any part of a clip can be sped up or slowed down, and you can choose whether to smoothly transition the frame rates between the part with the speed change and the rest of the clip. In the iMovie app on your Mac, select a range in a clip in the timeline by holding down the R key and dragging across the clip. To show the speed controls, click the Speed button. Do one of the following: Slow down the selected part of the clip: Click the Speed pop-up menu and choose Slow. By default, the speed is set to 50%, but you can click any speed button. Speed up the selected part of the clip: Click the Speed pop-up menu and choose Fast. By default, the speed is set to twice normal speed (2x), but you can click any speed button. Set a custom speed for the selected part of the clip: Click the Speed pop-up menu, choose Custom, and type a number in the field. The speed change is applied to the selected range, and speed sliders appear above the selected range and any areas of the clip outside the selected range. When you play back the clip, it begins playing at normal speed, then changes to the speed you set, then returns to normal speed again at the end of the clip. To have the speed changes occur gradually, select the Smooth checkbox. To adjust the speed of the selected range or an area outside it, drag any of the three speed sliders at the top of the clip.

Play a clip backward. In the iMovie app on your Mac, select a clip in the timeline. To show the speed controls, click the Speed button. Select the Reverse checkbox. A reverse-play icon appears on the clip, and the clip now plays in reverse, at the speed you set.

Slow down high-frame-rate clips to match the speed of your movie. By default, iMovie automatically slows down the speed of high-frame-rate clips when you add them to the timeline, adjusting them to play back at the same speed as the rest of your movie. You can turn off this setting in iMovie settings.

3. iPhone and iPad: speed changes on mobile devices

Did you learn them? Do you want to speed up or slow down some of the video footage/clips on your iPhone? Apple’s built-in video editor in the Photos app is simple and good enough for most users for basic edits like cropping and applying filters. However, Photos app is not capable of increasing or decreasing the speed of your clips and this is exactly why you’ll need a more advanced solution.

First and foremost, you’ll need to install the latest version of iMovie from the App Store. Even though it’s Apple’s app, it doesn’t come pre-installed on iOS/iPadOS devices. This will take you to your video timeline. In the bottom menu, next to the Cut tool indicated by a scissor icon, you’ll find a speedometer icon. This is the speed up/slow down tool. Now, depending on whether you want to increase or decrease the speed of the clip, you can move the slider to the right or left accordingly. Next, you need to save the video that you just edited. iMovie will now begin exporting the clip, but once it’s done, you’ll see a similar pop-up as shown below. You can repeat the above steps to increase or decrease the speed of other video clips too. Note that iMovie can take a longer time to export your video depending on its size. Your iPhone is capable of taking slow-motion videos natively, and you don’t really have to use iMovie if all you’re doing is slowing down videos. You can even adjust the slow-motion recording speed by adjusting the frame rate (FPS).

The ability to speed up and slow down clips is just one of the many video editing features that iMovie has to offer. You can adjust the speed of video clips in iMovie. You can even fine-tune speed adjustments for a single clip by dividing it into ranges, each with its own speed. For example, you could set multiple ranges so that a clip slows down, speeds up, and then slows down again. You can also freeze a single frame in your movie so that it looks like time has stopped. Note: If you change the speed of a Cinematic mode video clip, you’ll no longer be able to edit any of the Cinematic effects.

Adjust speed. In the iMovie app on your iPhone, open a movie project. Tap a video clip in the timeline to reveal the inspector at the bottom of the screen. Tap the Speed button. A yellow bar appears at the bottom of the clip, with range handles at each end. To create ranges within a clip, do one of the following: Drag either yellow range handle. Tap Add in the inspector to create another range. In the inspector, drag the slider right to increase the speed, or left to decrease it. As you drag, the relative speed is displayed below the clip (2x means twice the normal speed, and 1/2x means half the normal speed). If you want to create additional ranges, tap a portion of the clip outside of the currently selected range, or tap Add in the inspector to create a range border at the playhead position. Drag the yellow range handles to adjust the range, then adjust the range’s speed using the slider. Each range you create is indicated by a vertical white line at the bottom of the clip. To reset the entire clip to normal speed, tap Reset in the inspector. When you’re finished, tap anywhere outside of the inspector to dismiss it. By default, iMovie preserves the pitch of audio clips that are sped up or slowed down. To change this, tap the Project Settings button, then tap to turn on “Speed changes pitch.” This allows a recorded voice to be higher when sped up or lower when slowed down. Add a freeze frame. You can edit the duration of a freeze frame, or remove it and restore the clip to its original length. In the iMovie app on your iPhone, open a movie project. Touch and hold a clip in the timeline, then swipe left or right to find the frame you want to freeze. Tap the video clip in the timeline to reveal the inspector at the bottom of the screen. Tap the Speed button. A yellow bar appears at the bottom of the clip, with range handles at each end. In the inspector, tap Freeze. The frame at the playhead position is frozen, and remains attached to the source clip at either end.

diagram of speed controls UI

Illustrative image helps visualise the speed controls and how the clip duration changes with speed adjustments.

Learn How To Use iMovie In 5 Minutes

Short video shows how to locate the speed controls and apply Slow, Fast, and Custom speeds in iMovie on Mac and iPhone.

4. Quick note on alternatives and tips

If you are looking for some similar video editors to iMovie on Mac, we recommend Wondershare Filmora, which is both for Windows and Mac. As you can see from the video above, it is an efficient way to change video speed with Filmora. It enables you to edit videos within minutes easily.

In addition, Filmora for Mac has many other features, including playing videos in reverse and removing noisy background noise with one click. Step 1. Open the program and click "File" > "Import Media" to add videos to the program. Alternatively, you can directly drag-n-drop to add your video files. Step 2. Double-click the added video to open the video editing panel. Locate the "Speed" option, and the speed numbers will indicate how fast or slow the motion effects will be. Adjust to the speed you want. Step 3. Besides changing video speed, Filmora for Mac has many other features, including playing videos in reverse and removing noisy background noise with one click.

Note: Cinematic effects are not compatible with changing clip speed. If you change the speed of a Cinematic mode video clip, you can no longer adjust the clip’s focus in iMovie. However, you can still adjust its depth of field.

Additional notes for mobile and exporting

iMovie will now begin exporting the clip, but once it’s done, you’ll see a similar pop-up as shown below. You can repeat the above steps to increase or decrease the speed of other video clips too. Note that iPhone slow-motion capabilities can sometimes satisfy needs without iMovie, and exporting may take longer depending on size.

tags: #how #to #slow #a #clip #down