How to Halftone a Family in Revit

Many firms prefer to graphically distinguish the tags for existing and new elements. FYI: An application for all Revit users is the relationship between Halftone/Underlay and Printing color (Black Lines, Grayscale & Color).

If you want the tags for existing elements to be gray, changing the text color will work, but creates some challenges. The main challenge is, when printing you need to set the color option to Grayscale. However, with this setting your colored duct and pipe will not print black. Making the tag for existing elements graphically different is the easiest solution.

Adding a box around the text or a prefix such as “EX” would allow the contractor to discern the difference between new and existing. This option involves using a “normal” tag and overriding it “by element” each time one is placed. The override is to simply check the Halftone option as shown in the first image below. With this method you can select the Black Lines option when printing.

Everything prints black EXCEPT Arch/Struct elements (when view Discipline is set to one of the MEP options) AND any elements set to Halftone. In this case, all the colored ductwork prints black, but the background and existing tags still print gray. This concept for tags applies to any discipline.

Usually when you think of the word "half" you would correctly define it as 50%. But the word "halftone" probably just makes you think "gray". When you are working in Revit, you get several different places where you can define the appearance of elements as halftone. In the shipped templates Revit has gone ahead and set that at 50%. But really, most of the time drafters didn't think of halftone as a literal half.

If you need to change your halftone, just go to the Manage tab, click on Additional Settings and find the Halftone/Underlay button. And as a bonus, you can also control how your underlays show up on this window. See the "Apply Halftone" checkbox? Most folks get the slider where they want it and save it in their project template.

Practical steps to apply halftone to tags

  1. Open the project and select a tag family you want to modify for halftone behavior.
  2. Use a normal tag and override it by element to apply Halftone for existing elements.
  3. Enable Black Lines printing while halftoning other elements to achieve clear distinction on printed sheets.
  4. Optionally add a prefix like “EX” or a surrounding box to the tag text to distinguish existing versus new elements.
  5. Navigate to Manage > Additional Settings > Halftone/Underlay to adjust the global halftone level for the project.
  6. Adjust underlays visibility and the Apply Halftone checkbox to suit project needs, then save in the project template.

Tips for consistency and printing quality

  • Use a consistent convention (e.g., EX prefix or boxed text) across all tags to avoid confusion on site.
  • Test print a small set of sheets to verify that halftoned elements print in grayscale while new elements print in black or color as configured.
  • Keep in mind Arch/Struct discipline behavior when view settings are applied; this may affect how halftone tags render on printed sheets.
  • Document your project’s halftone policy in the template so new team members apply the same rules automatically.

This approach is applicable to any discipline within Revit and helps ensure that contractors can quickly distinguish between existing and new elements without compromising printing fidelity.

halftone tag distinction diagram

tags: #how #to #halftone #a #family #in