Every InDesign document comes with a default Basic Paragraph style, and you’ll use this style as a basis for all your text and adjust the settings so your type will look great. Double-click the Basic Paragraph style in your Paragraph Styles panel, and you’ll see the Paragraph Style Options dialog box.
Understanding the Hyphenation and Justification Settings
On the left side of the dialog box are several different categories. The General category is selected in the example shown here. Select the Hyphenation category to adjust hyphenation settings, and select the Justification category to adjust justification settings, as explained below. These hyphenation settings are recommended for justified text. They ensure that there aren’t too many hyphens in a row, words don’t get broken with just two letters on a line, such as op-era or opi-um, and the last word in a paragraph isn’t hyphenated, leaving part of a word alone on the last line.
With these settings, you can be confident that most, if not all, of your paragraphs will have even spacing and not too many hyphens. It’s a good idea to uncheck the Hyphenate box for all heading styles. When text is justified, InDesign must do its best to make your type look as evenly spaced as possible, a difficult task as every line contains a different number of characters. These settings allow InDesign to add or remove space between words (word spacing) and between letters (letter spacing), and even to make the characters slightly wider or narrower (glyph scaling), in order to make your paragraphs look their best.
The Adobe Paragraph Composer adjusts letter spacing and word spacing to achieve the best look for the paragraph as a whole. I think to some extent you're finding what you're looking for; in sampling a dozen books from commercial publishers I find variation in the hyphenation that about matches what I would expect for any given combination of page size, font and margin size, and overall text density. Novels tend to have relatively "soft" typesetting - large and loose - that allows a lot of room for tweaking away hyphens. One I glanced through appears to have no hyphenation at all, but that's with very loose spacing of both text and lines.
Most nonfiction work is set much more densely and does not have the "elasticity" of fiction. Most nonfic I look at, with overall denser page typography, have no excess of hyphenation to my (slightly fussy) eye but do have at least a few on each page, sometimes five or six. And, of course, the vocabulary in use has a huge effect. A novel using mostly simpler words can probably avoid hyphenation altogether, both because the 'soft' text flow has enough elasticity to avoid breaks and because many short words bypass the need altogether.
As for "how to do it" I think you have all the tools in front of you. It’s a matter of choosing an overall page density that matches the material, then adjusting the hyphenation rules to minimize hyphens (and if possible completely avoid stacks or page-enders). And then you go through paragraph by paragraph and apply a whole range of small tweaks to eliminate as many hyphens, especially "bad" ones, as you can. The two tools here are tracking (by tenths of a point) applied to as small a section of the text as possible to "pop" a hyphen forward or back; and text horizontal scale, by 1% increments, used in place of or in combination with tracking (again, on as short a segment of text as you can) to move the hyphen.
There is also the luxury, if you have it, of rewriting short passages to move troublesome words to another location within the line. (As an author/publisher, I do it all the time. Justified text is great, it’s clean, it’s tidy and - despite its apparent rigidity - can lead to some incredibly exciting, out-there design, as well as creating some of the most legible, accessible typesetting possible. Perhaps it looks choppy, maybe it’s all weird and stretched out. Maybe it’s super gappy in some places and oddly tight together in others. Worry not, in this article we’ll highlight how a few small tweaks is all it takes to perfectly justify text in InDesign.)
Click the burger icon of the Paragraph window and select Justification. The settings should pop up. Change the Minimum/Desired/Maximum Word Spacing to 85%/100%/130%, the Letter Spacing to -3%/0%/3% and Glyph Scaling to 97%/100%/103%. Tip: Make sure to have H+J violations switched on in InDesign’s preferences to see where you might need some work. If your H+Js are turned on correctly, this is what you should see. As you can see, after implementing the justification setting, the block of text is far more legible, accessible and aesthetically pleasing.
Using hyphenations wisely can help your text flow properly, however, it’s important to be aware of where you use them. It’s fine to avoid them completely if you wish but there might be times where adding one well placed hyphen at the end of a line can turn a super gappy line into a perfectly spaced one. In general, avoid using more than two hyphens on consecutive lines - this breaks the visual flow of the text. It’s also a good idea to check that where you hyphenate a word and knock it down to the next line actually makes sense. For example, hyphen-ate would be a better breaking of the word than h-yphenate - the latter is just plain confusing for anyone reading that single ‘h’ on a line by itself. It’s also a good general rule-of-thumb, to not have hyphenation on the first line of a paragraph, so look out for that! It’s not the worst crime in the world, but it generally looks better when short words like ‘I’ or ‘a’ aren’t found at the end of the line.
Click before the letter and soft return it to the line below using Shift+Enter. An orphan is a single word or a short line at the end of a paragraph, left isolated from the rest of the text on the following line, page or column. Left on its own, an orphan can make the paragraph and page look ragged, messy and unbalanced. Sometimes it’s unavoidable, but more often than not a little bit of rejigging will do the trick. Just try to make sure that there are at least two words on the last line, or (at the very least) one really long word.
InDesign is an amazing and powerful tool, I’ll never get tired of saying it! It is filled with automations to help you create beautiful and stunning documents that are still practical and user-friendly. More often than not, though, these same automations can lead to some confusion when it comes to hyphenation, and confusion can lead to mistakes. Let me help you prevent some with this post on how to understand, control, and disable InDesign hyphenation. I’ve divided the topics of this post into sections to help you navigate better. Click on the links to jump to each section: How Hyphenation Works in InDesign, Remove Hyphenation on a Single Word, Manually Adjust a Word's Hyphenation, Remove Hyphenation on the Entire Text, Edit Hyphenation Settings in InDesign.
Hyphenation is a very important element in a document; it controls how text is shown within the page. InDesign has very advanced features to best control hyphenation. These features are called “Composers.” There are essentially two types of “Composers”: Adobe Paragraph Composer (usually default), and Adobe Single-line Composer. These two composing methods calculate the possible line breaks according to: the set language, the hyphenation settings, the justification settings. Without getting into too much detail, the paragraph composer analyzes the entire paragraph to distribute words throughout the different lines, while the single-line composer analyzes, you guessed it, each single line. For your documents, I would suggest that you use the Adobe Paragraph Composer, as I feel it gives the best results, but if you want to change this setting, you can find more information here.
Setting the language in your document is necessary, not just for spell check, but also for hyphenation! If you set the wrong language, the hyphenation will be off. The image below is an example of that. Be careful: if you’re working on documents containing more than one language, you will have to make sure to set the right language for each section.
You can control hyphenation on a single word by acting on local format; applying a Character Style (suggested choice). To remove hyphenation on an entire text, disable Hyphenation in the Paragraph menu. You can edit how InDesign hyphenates text by changing the Hyphenation settings. This can be done both locally and within a style, but since doing it locally would be crazy, what we’re about to go through here is how to do it within a Paragraph Style. Go to edit Paragraph Style by double-clicking on the name. Go to the Hyphenation tab, here you will find these settings.
Words with at Least X letters controls the minimum length of the words on which to apply hyphenation. After First X letters/Before Last X letters controls the minimum number of characters that each part of the word has to have. Hyphen Limit X hyphens controls the maximum number of hyphens used in a paragraph. Hyphenation Zone indicates the distance from the right margin before a word is hyphenated. This option is only available for text that uses non-justified Single-line Composer.
Conclusion: While there are many more things to explore and discover about Hyphenation in InDesign, we hope this short guide has given you a clear idea on how to navigate this useful, if tricky, function. After all, our work here is to make your InDesign experience easier, whether it is through the use of tutorials, templates, scripts, or our very own language translation. Until next time,
How Composition Methods Affect Hyphenation and Justification
Text composition affects how InDesign handles spacing, line breaks, and hyphenation across paragraphs. When you work with text in InDesign, the application continuously decides where lines break, how spacing is distributed, and when hyphenation occurs. This process, called composition, directly affects readability and the visual consistency of your text.
InDesign provides two composition methods that evaluate potential line breaks based on your hyphenation and justification settings. These settings define acceptable ranges for word spacing, letter spacing, glyph scaling, and hyphenation. The composer then selects the best solution within those limits.
The key difference between the methods, Adobe Paragraph Composer and Adobe Single-line Composer, is scope. One considers the entire paragraph, while the other evaluates text line by line. The method you select influences how edits affect surrounding lines. The Adobe Paragraph Composer, the default option, evaluates all lines in a paragraph together. It can adjust earlier lines to prevent poor breaks later in the paragraph, resulting in more even spacing and fewer hyphenates overall. This method typically produces more consistent text color and smoother paragraphs, and it’s best suited for long-form content such as books, articles, and magazines. The Adobe Single-line Composer composes text one line at a time, finalizing each line before the next is evaluated, which is useful for headlines and short text where precise control over line breaks is important, though it can lead to less consistent spacing and more hyphenation.

InDesign: How to Get Better Justified Type (Video Tutorial)
- How Hyphenation Works in InDesign
- Remove Hyphenation on a Single Word
- Manually Adjust a Word's Hyphenation
- Remove Hyphenation on the Entire Text
- Edit Hyphenation Settings in InDesign
tags: #hyphenation #settings #indesign